David Clark H10-30 Gel ear seals Headset

The David Clark H10-30 headset is fitted with Gel filled ear seals and a padded head band assembly for a comfortable fit. The M-1/DC amplified dynamic microphone has an adjustable gain control making it specially suitable for open cockpit / noisy environment flying. This mic is mounted on a universal microphone boom for accurate positioning and the headset offers a noise reduction rating (NRR) of 24dB. Weighs approximately 480g.

The David Clark H10-30 headset is competitively priced and comes with a 5-year Guarantee. Across the world there more H10-30s in use than any other noise-attenuating headset. If you want the best value in noise- attenuating headset you’ll make the same choice that hundreds of thousand of pilots have made.

Earphone Type: Dynamic
Noise-Canceling Mic: M-1/DCAmplified Dynamic
Earphone Impedance: 150 ohms(300 each; wired in parallel)
Mic Impedance: 150 ohms +/- 20%
Earphone Sensitivity: 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz
Mic Sensitivity: 400mV RMS ±6dB into 150 ohm load @ 1kHz for 114dB SPL input
Earphone Frequency Response: 200-5,500 Hz Mic Freq Response: 300Hz--3.5KHz per RTCA DO 214
Earphone Plug: PJ-055 (.25" phone plug) Mic Plug: PJ-068 (.206" phone plug)
Boom Type: Hinged Wire
Cord: 5 ft.Straight
Headpad/Hardware: Super-Soft Headpad Weight/Headset Only: 480g